Beurer BM 57 Mode D'emploi page 32

• To clear individual measurements from the relevant
user memory, you must first select a user memory.
• Start the retrieval of the individual measured values.
• Press and hold the memory buttons M1 and M2 for
5 seconds.
• The selected value is deleted. The device briefly dis-
plays CL 00.
• If you would like to delete other values, repeat the pro-
cess described above.
You can switch off the device at any time by pressing the
START/STOP button.
Transfer via Bluetooth
®
It is also possible to transfer the measured values saved on
the device to your smartphone using Bluetooth
technology.
You will need the "beurer HealthManager"app for this. This is
available in the Apple App Store and from Google Play.
Proceed as follows to transfer values:
If Bluetooth is activated in the settings menu, the data is
®
transferred automatically after the measurement. The
appears in the top left of the display (see chapter 4 "Preparing
the measurement").
low energy technology
low energy
® Step 4: BM 57
data transfer immediately
following measurements.
• If Bluetooth
fer has been activated,
data is transferred after
symbol
having confirmed the user
memory and pressing the
START/STOP button
32
Step 1: BM 57
Activate Bluetooth on your device (see
®
chapter 4 "Preparing the measurement, Blue-
tooth ").
®
Step 2: "beurer HealthManager" app
In the "beurer HealthManager" app, add the
BM 57 under "Settings/My devices".
Step 3: BM 57
take a measurement.
Step 4: BM 57
Data transfer at a later point:
• Go to memory mode
data trans- (chapter 7). Select the
®
desired user memory. The
Bluetooth
automatically.
.
transfer starts
®