Connect The Scsi Cables - Promise Technology VTRAK 15100 Guide De Démarrage Rapide

VTrak Quick Start Guide
Step 5: Connect the SCSI Cables
When you attach the SCSI cables, you can use either the upper or lower
connector for each channel. The connectors are non-directional, there is no SCSI
in / SCSI out.
The VTrak 15100 can be configured in one of five ways:
• One VTrak, one Host PC, one SCSI card
• One VTrak, one Host PC, two SCSI cards
• One VTrak, two Host PCs, one SCSI card in each
• Two (or more) VTraks, one Host PC, one SCSI card (daisy chain)
• Two VTraks, oneHost PC, two SCSI cards
One VTrak, one PC, one SCSI card
Host PC
To prevent possible damage to the VTrak or your PC, ensure that
the power to both units is OFF before connecting the SCSI cables.
VTrak has two SCSI channels. When you attach a SCSI cable to
the connector of one channel, be sure to attach a terminator to the
other connector of the same channel.
SCSI Terminator
SCSI Card
Caution
Important
SCSI Cable
Connect to either channel 1 or 2
8
VTrak