Promise Technology VTRAK 15100 Guide De Démarrage Rapide page 14

VTrak Quick Start Guide
For a full list of CLU capabilities and functions, see Chapter 5 the VTrak 15100
User Manual.
Set IP Addresses and Subnet Mask
This procedure is required for a network connection to the VTrak. In order for the
network connection to work, you must set the IP addresses of the Management
Port and Gateway, and set the Subnet Mask.
If you do not plan to use a network connection, you can skip to the next
procedure.
VTrak's Management Port can only use a static IP address. It will not accept a
dynamic IP address from a DHCP server.
1. At the CLU main menu, press 4 and Enter to select Network Management.
The Network Management Menu appears.
--------------------------------------------------------------------------
Management Port IP Address: 10.0.0.2
Subnet Mask: 255.0.0.0
Gateway IP Address: 0.0.0.0
Telnet: disabled
TFTP Server IP Address: 0.0.0.0
SNMP Name: Sonoma
14