Promise Technology VTRAK 15100 Guide De Démarrage Rapide page 25

Step 10: Configure VTrak with WebPAM PRO
VTrak Setup Task List
1. Log-in to WebPAM PRO (below)
2. Create a New Host (page 28)
3. Access a Host (page 29)
4. Create a Logical Drive (page 30)
5. Assign a SCSI Target ID page 32)
6. Assign a RAID Console LUN (page 33)
7. Assign an IP Address (page 35)
8. Log-out of WebPAM PRO page (page 36)
9. Internet connection using WebPAM PRO (page 36)
Log-in to WebPAM PRO
1. Launch your Browser.
2. In the Browser address field, type in the IP address of the PC/Server where
you installed WebPAM PRO, as explained below. Do not type the VTrak's IP
address.
If you did not choose the External Security option during WebPAM PRO
installation, use the Regular connection.
If you chose the External Security option during WebPAM PRO installation
(see page 21), use the Secure connection.
Regular Connection
• WebPAM PRO uses an HTTP connection. . . . . . . . . . . . . . . . .http://
• Enter the PC/Server's IP address . . . . . . . . . . . . . . . .192.168.1.118
• Enter the Port number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . :8080
• Add promise to launch WebPAM PRO . . . . . . . . . . . . . . . . /promise
Together, your entry looks like this:
http://192.168.1.118:8080/promise
Secure Connection
• WebPAM PRO uses a secure HTTP connection . . . . . . . . . . .https://
• Enter the PC/Server's IP address . . . . . . . . . . . . . . . .192.168.1.118
• Enter the Port number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . :8443
• Add promise to launch WebPAM PRO . . . . . . . . . . . . . . . . /promise
Step 10: Configure VTrak with WebPAM PRO
25