Promise Technology VTRAK 15100 Guide De Démarrage Rapide page 31

3. If you want to initialize the disk drives in your logical drive, check the Initialize
Logical Drive box. Then select the type of Initialization from the drop-down
menu:
Quick – Erases the Reserve Sector, which contains the logical drive data on
each disk drive.
Full – Erases all data on the disk drives.
4. Select the Free Disks you want to use and click the >> button or double-click
on the disks to move them to the Used Disks field.
5. Click the Submit button when you are done. A confirmation popup message
appears when the logical drive has been created.
6. Click OK in the confirmation message.
The new logical drive appears in the Logical Drive View list (above).
If you selected Full Initialization, that process will continue for some time.
When Logical Drive Status shows Functional, you have completed logical
drive creation on VTrak. In order to use this logical drive read and write data,
you must partition and format it using your PC's operating system.
See Chapter 4 of the VTrak 15100 User Manual for a full discussion of
logical drive creation and management using WebPAM PRO.
Step 10: Configure VTrak with WebPAM PRO
31