Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
APPLICATIONS
Wood, plywood, color board, soft fabric board, hard board similar materials and aluminum sash.
PREPARATION BEFORE OPERATION
Make the following preparations before operating the power tool:
1. Installation
19-1/16" (484 mm)
3/8" (10 mm), 4 Holes
16-27/32" (428 mm)
Attach the power tool to a level, horizontal work bench in accordance with Fig. 4.
Select 5/16" (8 mm) diameter bolts suitable in length for the thickness of the work bench.
Bolt length should be at least 2" (50 mm) plus the thickness of the work bench.
For example, use 5/16" (8 mm) 3" (75 mm) bolts fot a 1" (25 mm) thick work bench.
The extension stay attached to the rear of the base (see Fig. 2) helps stabilize the power tool.
10
All manuals and user guides at all-guides.com
Base
Fig. 4
5/16" (8 mm) Bolt
5/16" (8 mm) Nut
Work Bench
Publicité
Table des Matières
