Linea 2000 DOMO DO927BFK Mode D'emploi page 44

ure the lower door is aligned
zontally and vertically, so that
seals are closed on all sides
ore finally tightening the hinge.
8. Position the upper door. Position the hinge of the upper door, fasten it with the screw and
replace the cover plate.
y set the upper door back into
nserting in onto the middle hinge.
he upper hinge and screw it
o the top of the unit.
ure the upper door is aligned
zontally and vertically, so that
seals are closed on all sides
ore finally tightening the hinge.
9. With the door closed, check whether the door is aligned horizontally as well as vertically
hinge cover back.
and that the seal closes on all sides before you tighten the upper hinge completely. If
necessary, adjust the adjustable feet.
TROUBLE SHOOTING
Frequently, a problem is minor and a service call may not be necessary, use this trouble
shooting guide for a possible solution.
Does not work
· Check connection of power cord to power source.
· Plug in unit
· Use proper voltage.
Cools too frequently
dd 9
· Check temperature setting and adjust as needed.
· Close door securely.
· Be sure that food is cool before inserting.
· Do not keep door open for too long and MINIMIZE door openings.
· Do not place unit close to heat sources Or direct sunlight.
Intemal temperature not cold enough
· Check connection of power cord to Power source.
· Plug in unit
· Check setting and adjust as needed.
· Close door securely.
· Be sure that food is cool before inserting.
· Do not keep door open for too long and MINMIZE, door openings.
· Allow room for airto circulate around unit..
· Use proper voltage.
· Do not place unit close to heat sources or direct sunlight.
44
DO927BFK
9
1/2/16 10:43 am