Connecting Your Tv And Dvd Player; Switching On And Playing A Dvd - Pioneer VSX-C502 Mode D'emploi

Quick start guide

Connecting your TV and DVD player

1 Connect your DVD player to the receiver.
Connect a 21-pin SCART cable (not supplied) between
the AV output of your DVD player and the DVD IN AV
connector of this receiver for the video and analog audio.
(See Specifications on page 50 for the pin assignment.)
For digital audio, connect a coaxial digital audio cable
(not supplied) between your DVD player's coaxial digital
output and the DVD(STB) COAX jack on this receiver.
• If your DVD player doesn't have a coaxial digital out
you can use an optical cable connected between the
optical output jack on your DVD player and the
STB(DVD) OPT1 jack on this receiver. However, you
VSX-C502
COAXIAL
OPTICAL
DIGITAL AUDIO OUT
DVD player

Switching on and playing a DVD

Once you switch the receiver on it will automatically
detect the speakers you have connected. Although there
are a number of more detailed settings you can make to
optimize the surround sound, you should be able to get
acceptable surround sound performance right away.
1 Switch on your TV and powered subwoofer.
Also make sure that your TV is set to the AV input you
connected the receiver to.
2 Press RECEIVER on the remote or
ON on the front panel to switch on the receiver.
3 Press DVD on the remote or turn the INPUT
SELECTOR knob on the front panel to select the DVD
input.
4 Switch on your DVD player.
5 Load a DVD and start playback.
ANTENNA
AM LOOP
FM UNBAL 75Ω
+
DIGITAL IN
–
R L CENTER R L SURROUND
STB DVR/TV DVD
FRONT SURROUND SUB
BACK
SPEAKERS
(DVD) (STB)
WOOFER
OUT OPT1 OPT2 COAX
AV CONNECTOR (RGB) - TV/AV Receiver
STANDBY/
will have to reassign the input to DVD before using
for the first time. See Optical input setting on page 38
for how to do this.
• If you connect an optical digital cable, be careful
when inserting the plug not to damage the shutter
protecting the optical socket.
2 Connect your TV to the receiver.
Use a 21-pin SCART cable (not supplied) to connect the
DVR/TV IN/OUT AV connector on this receiver to a
SCART input on your TV.
3 Connect the supplied AC power cable to the AC
IN on this receiver and plug in the other end to a
power outlet.
OUT
IN
CONTROL
CENTER SURROUND
VIDEO IN/OUT DVR/TV IN/OUT
AV CONNECTOR
L
R
SUB WOOFER
AUDIO IN (5.1CH) DVD IN
TV
This receiver will automatically decode Dolby Digital,
DTS, or Dolby Surround DVD-Video discs, according to
your speaker setup. In most cases, you won't have to
make changes for realistic surround sound.
Other possibilities (like listening to a CD with
multichannel surround sound) are explained in Home
theater sound on page 27.
6 Use the MASTER VOLUME control (front panel or
remote) to adjust the volume.
• Turn down your TV's volume so that you only hear
sound from this system.
AC IN
STB IN
AV CONNECTOR IN
01
7
En