Using The Surround Back Channel; Listening With Virtual Surround Back Speakers - Pioneer VSX-C502 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Home theater sound

Using the surround back channel

• Default setting: SB ON
You can have the receiver automatically switch to Dolby
Digital EX or DTS-ES decoding for 6.1 encoded sources
(SB AUTO), or you can choose to listen to other kinds of
sources (for example, 5.1 encoded material) with 6.1
encoding (SB ON). With 5.1 encoded sources, a surround
SB CH
Type of source
mode
Dolby Digital EX/DTS-ES
ON
encoded multichannel
AUTO
source with 6.1ch
surround
Dolby Digital 5.1ch
ON
source
AUTO
ON
Dolby Digital/DTS
encoded multichannel
AUTO
source
ON
Dolby Digital/DTS
encoded stereo source;
AUTO
other digital stereo
source
ON
Analog 2-channel
(stereo) source
AUTO
* All modes except VIRTUAL mode
Press SBch MODE repeatedly to cycle through the
surround back channel options.
Each press changes the setting as follows:
• SB AUTO
• SB ON
• SB OFF
Note
• If the Surround back speaker setting is set to SB ––,
you can only use the virtual surround back effect (see
below).
• You can't hear the surround back channel with DTS
96 kHz/24-bit sources.
AUTO
ì
ì
ì
ì
ì
ì
ì
ì
SBch
MODE
back channel will be generated, but the material may
sound better in the 5.1 format for which it was originally
encoded, in which case you can simply switch the
surround back channel off (SB OFF).
The table below indicates when you will hear the
surround back channel when playing various kinds of
ì
sources. (
=Sound plays through surround back
channel speaker.)
Surround
MOVIE, MUSIC,
NEO:6 CINEMA,
PROLOGIC
NEO:6 MUSIC
ì
ì
ì
ì
ì
Listening with virtual surround back
speakers
• Default setting: VIR.SB OFF
If you don't have a real surround back speaker
connected, you can use the Virtual Surround Back
feature to simulate one.
Note that this feature only works when the surround
channels are active and the Surround back speaker
setting is set to SB ––. See also Surround-back speaker
setting on page 36.
Press SBch MODE repeatedly to switch between
VIR.SB ON and VIR.SB OFF.
Advanced
Surround*
ì
ì
ì
ì
ì
ì
ì
ì
ì
ì
ì
ì
ì
ì
06
29
En

Publicité

Chapitres

Table des Matières
loading

Table des Matières