Sr+ Control For Pioneer Plasma Displays; Using The Sr+ Mode With A Pioneer Plasma Display - Pioneer VSX-C502 Mode D'emploi

The System Setup menu

SR+ control for Pioneer plasma displays

Make the following settings if you have connected a
Pioneer plasma display to this receiver using the
supplied SR+ cable. Note that the number of function
settings available will depend on the plasma display
you've connected.
See also Using this receiver with a Pioneer plasma display
on page 18 and Using the SR+ mode with a Pioneer
plasma display on page 39.
Volume control setting
• VOL C OFF – The receiver does not control the
volume of the plasma display
• VOL C ON – When the receiver is switched to one of
the inputs that use the plasma display (DVD, or
another one of functions listed below), the volume on
the plasma display is muted so only sound from the
receiver is heard.
Function setting for DVD input
• DVD:1 – DVD:5 or TV – Matches the DVD function of
the receiver with a numbered video input on the
plasma display. For example, DVD:3 matches the
DVD input with video input 3 on the plasma display.
Function setting for STB input
• STB:1 – STB:5 or TV – Matches the STB function of
the receiver with a numbered video input on the
plasma display. For example, STB:1 matches the STB
input with video input 1 on the plasma display.
Function setting for DVR/TV input
• DVR:1 – DVR:5 or TV – Matches the DVR/TV
function of the receiver with a numbered video input
on the plasma display. For example, DVR:2 matches
the DVR/TV input with video input 2 on the plasma
display.
Function setting for VIDEO input
• VIDEO:1 – VIDEO:5 or TV – Matches the VIDEO
function of the receiver with a numbered video input
on the plasma display. For example, VIDEO:TV
matches the VIDEO input with TV on the plasma
display.
Function setting for FRONT input
• FRONT:1 – FRONT:5 or TV – Matches the
function of the receiver with a numbered video input
on the plasma display. For example, FRONT:4
FRONT
matches the input with video input 4 on the
plasma display.
Note
• You won't be able to control the input if you switch
the function setting off (– shows in the display), even
if the SR+ feature is switched on.
Using the SR+ mode with a Pioneer plasma
display
When connected using the supplied SR+ cable, a
number of features become available to make using this
receiver with your Pioneer plasma display even easier.
These features include:
• On-screen displays when making receiver settings,
such as speaker setup, MCACC setup, and so on.
• On-screen volume display.
• On-screen display of listening mode.
• Automatic video input switching on the plasma
display.
• Automatic volume muting on the plasma display.
(When VOL C ON is selected.)
See also Using this receiver with a Pioneer plasma display
on page 18 for connecting up, and SR+ control for Pioneer
plasma displays on page 39 for setting up the receiver.
1 Make sure that the plasma display and this
receiver are switched on and that they are
connected with the SR+ cable.
See Using this receiver with a Pioneer plasma display on
page 18 for more on connecting these components.
2 To switch SR+ mode on/off, press SR+ button on
the remote control.
Caution
• The SR+ setting remains in effect even if the power is
switched off.
• The automatic volume muting feature is enabled
separately; see SR+ control for Pioneer plasma
displays on page 39.
FRONT
09
39
En