Product Description And Specifications; Product Features; Technical Data; Noise/Vibration Information - Bosch GDS 18V-300 Professional Notice Originale

Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The machine is intended for driving in and loosening screws
and bolts as well as for tightening and loosening nuts within
the respective range of dimension.

Product features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Tool holder
A)
(2) Carrying strap
A)
(3) Belt clip
A)
(4) Battery
A)
(5) Battery release button
(6) "Automatic shutdown (ABR)" button
(7) "Automatic shutdown (ABR)" LED
(8) Rotational direction switch
(9) On/off switch
(10) "PowerLight" lamp
(11) Handle (insulated gripping surface)
(12) Application tool (e.g. impact socket)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Technical Data

Cordless Impact Wrench
Article number
Rated voltage
A)
No-load speed
A)
Impact rate
A)
Max. torque
Machine screw diameter
Tool holder
Weight according to
B)
EPTA-Procedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
C)
ure during operation and
during storage
Bosch Power Tools
Cordless Impact Wrench
Recommended rechargeable
batteries
Recommended chargers
A) Measured at 20−25 °C with rechargeable battery GBA 18V
B) Depends on battery in use
C) Limited performance at temperatures <0 °C

Noise/vibration information

Noise emission values determined according to
EN 62841-2-2.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 100 dB(A); sound power level
111 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 62841-2-2:
Tightening screws and nuts of the maximum permitted size:
a
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
A)
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
GDS 18V-300
over the total working period.
3 601 JD8 2..
Implement additional safety measures to protect the oper-
V= 18
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
-1
min 0–2 400
and organising workflows correctly.
-1
min 0–3 400
Nm 300
Assembly
mm M10–M18
u
∎ ½"
kg 1.6–2.6
°C 0 to +35
Charging the Battery
°C –20 to +50
u
4.0Ah.
(triax vector sum) and uncertainty K
h
2 2
< 18 m/s , K = 1.5 m/s
Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Use only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
1 609 92A 4Z1 | (06.11.2020)
English | 13
GDS 18V-300
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...