Setting Up And Connecting The Cooling Device - Dometic COOLMATIC MDC 065 Notice D'utilisation

Setting up and connecting the cooling device

7 Setting up and connecting the cooling
device
7.1 Setting up the cooling device
The device is designed for ambient temperatures between +16 °C and +32 °C. In
continuous operation, the air humidity may not exceed 90 %.
Set up the cooling device in a dry, sheltered place. Avoid placing it near heat sources
such as radiators, gas ovens or hot water pipes. Do not let it stand in the direct,
strong sunlight.
The cooling device must be positioned so that heated air can dissipate easily.
Therefore make sure there is adequate ventilation (fig. 2, page 4).
No. in
fig. 2,
Explanation
page 4
1 Hot waste air
2 Cold intake air
7.2 Sealing system
The cooling device has a locking mechanism to protect it during transport.
The following settings are possible:
• Position 1 (transport lock) (fig. 3 1, page 4): The door is locked and secured.
To open the door, turn the bolt to position 2.
• Position 2 (releasing transport lock) (fig. 3 2, page 4): The door can
be opened.
• Position 3 (VENT position) (fig. 3 3, page 4): The door is slightly open, but fixed
in position. Use this position, for example, if you are not going to use the device
for a long time.
12
MDC
EN