Operation; Energy Saving Tips - Dometic COOLMATIC MDC 065 Notice D'utilisation

Operation

8 Operation
I
NOTE
Before starting your new cooling device for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter "Cleaning and maintenance" on
page 19).
8.1

Energy saving tips

• Choose a well ventilated installation location which is protected against direct
sunlight.
• Allow food to cool down first before placing it in the device.
• Do not open the cooling device more often than necessary.
• Do not leave the door open for longer than necessary.
• Defrost the cooling device as soon as a layer of ice forms.
• Avoid unnecessarily low temperatures.
• Clean the condenser of dust impurities at regular intervals.
8.2 Using the cooling device
The fridge device conserves fresh foodstuffs. You can also conserve frozen foodstuffs
in the freezer compartment.
A
NOTICE!
Ensure that food or liquids in glass containers are not excessively
refrigerated.
Liquids expand when they freeze and can thus destroy the glass
containers.
➤ Switch the cooling device on by turning the knob (fig. 1 A, page 3) to the right.
I
NOTE
After switching on, the cooling device requires approx. 60 s until the
compressor starts up.
A
NOTICE!
Ensure that the objects placed in the cooling device are suitable for
cooling to the selected temperature.
16
MDC
EN