Panasonic TY-WK85PV12 Manuel D'installation page 16

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 45
Installation procedure
5. Remove the two screws for mounting back
cover under the stand hook which are attached
to the back of the plasma display unit.
With the engraved mark facing up, mount the
grounding fitting and secure it using the screws
which were removed.
• The screws should be securely tightened to the
torque given below.
(1.2~1.5 N•m)
6. Adhere the gasket for the grounding fitting on
the grounding fitting after aligning the gasket
with the engraved mark and top surface of the
grounding fitting.
3. Assembling the wall-hanging bracket.
1. Position the joints so that the gasket sides
are facing up, and insert the short joints
into the long joints.
Secure the joints together using the two flat
countersunk head screws provided for this
purpose.
(Make two assemblies of the long and short
joints.)
• The screws should be securely tightened to
the torque given below.
(1.2~1.5 N•m)
16
Stamp mark
Align the gasket with the top
surface of the fitting
Stamp mark
Flat countersunk head screws
for securing the joints
Gasket
Grounding fitting
Screws for mounting back cover
Gasket for the
grounding fitting
Gasket
Joints (short)
Joints (long)

Publicité

Table des Matières
loading

Table des Matières