Display Items; Automatic Retuning For Best Reception Results - Sony CDX-M9900 Mode D'emploi

Display items

Information on the station/frequency/programme
currently selected is automatically displayed.
Positions of display items differ depending on
the selected face pattern.
For details, see "Selecting the face pattern" on
page 28.
When "Skin1" is selected.
A
When "Skin2" is selected.
A C
When "Skin3" is selected.
A
A Source/Band number
B Function and mode status
ST: Stereo reception mode
: ATT
AF: AF function
TA: Traffic announcements
TP: Traffic programme
: DSO
: EQ7
C :RDS reception/
Station name (Frequency), Current status/
Messages
24
B
C
B
C
B
:Preset number/
Automatic retuning for best
reception results
— AF
The alternative frequencies (AF) function allows
the radio to always tune into the area's strongest
signal for the station you are listening to.
Frequencies change automatically.
98.5 MHz
Station
1
Select an FM station (page 21).
2
Press (AF) repeatedly until "AF" lights
up.
The unit starts searching for an alternative
frequency with a stronger signal in the same
network.
If "NO AF" is displayed, the currently tuned
station does not have an alternative frequency.
Note
When there is no alternative frequency in the area, or
when you do not need to search for one, turn the AF
function off.
For stations without alternative
frequencies
Press < or , while the station name
is flashing (within 8 seconds).
The unit starts searching for another
frequency with the same PI (Programme
Identification) data ("PI Seek" appears).
If the unit cannot find the same PI, the unit
returns to the previously selected frequency.
96.0 MHz
102.5 MHz