Features; Assembly - Ryobi RY44140 Manuel D'utilisation

PRODUCT SPECIFICATIONS
Cutting Capacity.............................................................................................................................................................2/3 in.
Total Blade Length...........................................................................................................................................................24 in.
Cutting Strokes Per Minute .............................................................................................................................................1,500
Input ............................................................................................................................. nominal 120V/60Hz AC only, 4 Amps
KNOW YOUR HEDGE TRIMMER
See Figure 2.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
BLADE COVER
The blade cover keeps the operator from coming in contact
with the sharp blades when the tool is not in use. It also helps
keep the blades from being nicked or damaged when the
tool is in storage.
CORD RETAINER
A convenient cord retainer helps keep the extension cord
connection secure during trimmer operation.
UNPACKING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-860-4050 for assistance.
PACKING LIST
Hedge Trimmer
Blade Cover
Debris Deflector
Deflector Retainer
Operator's Manual

FEATURES

DEBRIS DEFLECTOR
When installed, the debris deflector makes removal of cut
debris easier.
GUARD
The guard helps to deflect chips or other debris away from
the operator's hands.
ROTATING REAR HANDLE
The rear handle can be rotated to lock at either side in 45°
or 90° angles for ease of use when trimming. This is useful
when trimming vertically or along the sides of shrubbery.
SWITCH TRIGGER
The switch trigger, located beneath the rear handle, must
be depressed while simultaneously grasping the switch in
the front handle to allow blade rotation.

ASSEMBLY

WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.
6 – English