Switching The Appliance On; Operating Tips - Bosch GSN Série Mode D'emploi

en
Controls
Fig. 2
On/Off button
1
Serves to switch the whole
appliance on and off.
2 Temperature selection button
The required temperature is set
with this button.
3 Temperature display
Indicates the set temperature of
the freezer compartment.
Alarm button
4
Used to switch off the warning
signal, see chapter "Alarm
function".
5 "super" button
To switch on super freezing
function.
See chapter entitled "Super
freezing".
26
Switching
the appliance on
Fig. 2
Switch on the appliance with the
On/Off button 1.
A warning signal sounds.
The temperature display 3 flashes
and the alarm button 4 is lit.
Press the alarm button 4. The warning
signal switches off.
When the freezer compartment has
reached the set temperature, the
temperature display 3 is lit.

Operating tips

When the appliance has been
■
switched on, it may take several hours
until the set temperature has been
reached.
The fully automatic No Frost system
■
ensures that the freezer compartment
remains free of ice. Defrosting is not
required.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
The appliance features door
■
ventilation to prevent a partial vacuum
in the freezer compartment and to
ensure that the appliance door can be
opened easily at any time.