Adjusting The Water Temperature - Jaga CLIMA CANAL HYBRID H8 Manuel D'installation Et D'utilisation

7.2. ADJUSTING THE WATER TEMPERATURE
7.2.1. Adjusting the maximum water temperature for cooling
By reducing the water temperature setting, the unit will start later. If the water temperature is set
higher, the unit will start sooner .
1. Start setup mode: press and hold the [-] button until the blue LED flashes 5x and release .
2. Short press the [-] or [+] button to adjust the set temperature .
3. Exit setup mode: hold the [-] button until the blue LED flashes 5x and release .
INPUT: 110-240VAC
CO2
OUTPUT: 24V
PC / RF
N L
Automatic control: The green LED lights up when the water temperature (supply water) is lower than the
set temperature
7.2.2. Adjusting the minimum water temperature for heating
By increasing the water temperature setting, the unit will start later. If the water temperature is set
lower, the unit will start sooner .
In combination with a heat pump, it may be necessary to reduce the water temperature .
1. Start setup mode: Press and hold the [+] button until the red LED flashes 5x and release .
2. Short press the [-] or [+] button to adjust the set temperature .
3. Exit setup mode: press and hold the [+] button until the red LED flashes 5x and release .
INPUT: 110-240VAC
CO2
OUTPUT: 24V
PC / RF
N L
Automatic control: The green LED lights when the water temperature (supply water) exceeds the set
temperature .
After 30 seconds, the new settings are automatically saved and the device returns to the
selected mode.
52
12 ̊ C 14 ̊ C 16 ̊ C
The blue LED flashes quickly when the minimum tempera-
ture is reached.
The red LED flashes quickly
re is reached.
24 ̊ C 26 ̊ C 28 ̊ C
The blue LED flashes quickly when the minimum tempera-
ture is reached.
The red LED flashes quickly when
ture is reached.
JAGA N.V. | CLIMA CANAL PLUG & PLAY | MANUEL | 2021.05.03 | V.01
18 ̊ C 20 ̊ C 22 ̊ C 24 ̊ C
when the maximum temperatu-
30 ̊ C 32 ̊ C 34 ̊ C 36 ̊ C
the maximum tempera-
26 ̊ C
PC / RF
N L
38 ̊ C
PC / RF
N L
INPUT: 110-240VAC
CO2
OUTPUT: 24V
INPUT: 110-240VAC
CO2
OUTPUT: 24V