Factory Reset; Circuit Board Error Code - Jaga CLIMA CANAL HYBRID H8 Manuel D'installation Et D'utilisation

7.3. FACTORY RESET
1. Disable power charge .
2. Press and hold down both the [-] and [+] button on the circuit board and
switch on the power again. The blue LED will light up, followed by the green
LED 2 seconds later and the red LED 4 seconds later. Release the buttons as
soon as all 3 LEDs are flashing .
3. The controller will return to the Factory Default settings, all LEDs will flash for 8 seconds .
7.3.1. Circuit board error code
INPUT: 110-240VAC
CO2
OUTPUT: 24V
PC / RF
N L
7.3.2. Control panel error codes
JAGA N.V. | CLIMA CANAL PLUG & PLAY | MANUEL | 2021.05.03 | V.01
Error sensor - Check the water temperature sensor
Check the water temperature sensor
INPUT: 110-240VAC
CO2
OUTPUT: 24V
PC / RF
N L
EN
53