Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6. GAUGE CONSUMPTION, ENERGY SAVINGS
In the device display, a selector indicates the energy comsumption level by positioning it in front of
the colour: red, orange or green. So, depending on the setting temperature, you can choose your
level of energy usage. As the temperature setting increases, the consumption will be higher.
7. SETTING THE COMFORT MODE TEMPERATURE
You can access the Comfort temperature set up from the Auto and Comfort Mode. It is preset to 19°C.
Using
and
, you can adjust the temperature from 7°C to 30°C by intervals of 0,5°C.
You can limit the Comfort temperature
8. ENERGY SAVINGS
It is possible to see the estimation of energy consumption in kWh since the last reset of the energy
meter.
8.1. DISPLAY OF THE ESTIMATED POWER CONSUMPTION
To see this estimation, from Auto, Comfort, Eco or Frost protection mode, then press
To exit the display mode of consumption: press
active mode.
8.2. RESETTING THE ENERGY METER
1 2 3 4 5 6 7
9. CHILD LOCK, KEYPAD LOCK / UNLOCK
– To lock the keypad, press the
symbol
appears on the display, the keypad is locked.
– To unlock the keypad, press the
padlock symbol
disappears on the display, the keypad is unlocked.
78
A. Green colour - ideal temperature level.
Setting temperature ≤19 ̊ C
B. Orange colour - average temperature level. It is advisable to slightly
reduce the setting temperature.
19 ̊ C < setting temperature ≤ 22 ̊ C
C. Red colour - High temperature level. It is advisable to significantly
reduce the setting temperature.
setting temperature > 22 ̊ C
-
See
13. user settings
– Press
.
– Press simultaneously
until it reset to 0000.
– To exit resetting the energy meter, press
automatically in the previous active mode.
and
buttons and hold them down for 10 seconds. The padlock
and
buttons and hold them down for 10 seconds again. The
or
. The device is automatically in the previous
and
for more than 5 seconds,
.
or
, the device is
Publicité
Chapitres
Table des Matières
