Helios - Jaga Helios electric Manuel D'installation Et D'utilisation

21.2. HELIOS
The wall fixings with the screws and washers. Be sure that the fixings are level before screwing. Push
te radiator with its brackets into the wall fixings and tighten the hexagon socket screw.
Working pressure max. 6 bars.
L – 12
G1/2"
Dimensions in cm
– For safety reasons wall plugs aren't delivered. Contact your specialist store for the right type.
– Upper tubes are not as warm as the bottom tubes.
– Do not refill: device is filled once in its entire service life. Liquid level has been calculated and
must therefore not be emptied or topped up.
92
5
L – 5
L
Tightening torque: 4Nm
5
G1/2"
MM
Tighten the bracket firmly by hand
3
Washer
The slot of the washers has
to be mounted vertical