Ec Declaration Of Conformity; Confirmation Of Cip Testing; Health And Safety Of The Operator; Noise Information - Hilti DX 36 Mode D'emploi

or consequential damages, losses or expenses in
connection with, or by reason of, the use of, or
inability to use the tool for any purpose. Implied
warranties of merchantability or fitness for a par-
ticular purpose are specifically excluded.

13. EC declaration of conformity

Designation:
Type:
Year of design:
We declare, on our sole responsibility, that this
product complies with the following directives and
standards: 2006/42/EC.

14. Confirmation of CIP testing

The following applies to C.I.P. member states outside
the EU and EFTA judicial area: The Hilti DX 36 has
been system and type tested. As a result, the tool
bears the rectangular PTB approval mark showing
approval number S 801. Hilti thus guarantees com-

15. Health and safety of the operator

15.1 Noise information

Powder-actuated fastening tool
Type
Model
Caliber
Power regulation
Application
Noise values measured and declared in accordance with ISO 4871:1996
Noise (power) level, L
WA, 1S
Measurement uncertainty, K
Sound pressure level at the workplace (1000 fasten-
ings per day), L
pAeq
Printed: 07.07.2013 | Doc-Nr: PUB / 5069831 / 000 / 00
Powder-actuated
fastening tool
DX 36
1986
WA
For repair or replacement, send the tool or related
parts immediately upon discovery of the defect to
the address of the local Hilti marketing organization
provided.
This constitutes Hilti's entire obligation with regard
to warranty and supersedes all prior or contempor-
aneous comments and oral or written agreements
concerning warranties.
Hilti Corporation
Norbert Wohlwend
Head of Quality & Processes Man-
agement
BU Direct Fastening
01 2011
pliance with the approved type. Unacceptable defects
or deficiencies, etc. determined during use of the
tool must be reported to the person responsible at
the approval authority (PTB) and to the Office of the
Permanent International Commission (C.I.P.).
DX 36
Series
6.8/11 yellow
3
Fastening 20 mm laminated wood to concrete (C40)
with the X-U47 P8
103 dB (A)
2 dB
85 dB (A)
en
Tassilo Deinzer
Head BU Measuring Systems
BU Measuring Systems
01 2011
35