After Finishing Work - Festool CLEANTEX CT 26 E Guide D'utilisation

Insert a new filter bag if necessary (see Insert-
ing the filter bag).
2
6
Replace the top section [2-1] and close the
locking clips [2-2].
Changing the main filter
NOTE
Motor damage
Never operate the extractor without a main filter
fitted as the motor may become damaged.
Open the locking clips [2-2] and remove the top
section of the machine [2-1].
Turn the top section of the machine so that the
main filter is facing upwards (Fig.[7]).
Fold over the lever [7-3] and remove the retain-
er [7-2].
Remove the used main filter [7-1] and replace
with a new one.
Dispose of the used main filter in accordance
with statutory regulations.
Switch off the mobile dust extractor and discon-
nect the plug.
12
1
3

After finishing work

Insert the retainer [7-2] and fold over the lever
[7-3] until it engages.
Replace the top section [2-1] and close the
locking clips [2-2].
7
7-1
1
3
5
Wind up the mains power cable.
Empty the dust container.
7-2
7-3
2
4