Changing The Player Settings - Panasonic DVD-S97 Manuel D'utilisation

Changing the player settings

1
SETUP
Shows Setup menu.
≥The settings remain intact even if you switch the unit to standby.
≥Underlined items are the factory preset.
∫ "Disc" tab
Audio
Choose the audio language.
Subtitle
Choose the subtitle language.
Menus
Choose the language for disc menus.
Ratings
Set a ratings level to limit DVD-Video play.
≥ Follow the on-screen instructions.
∫ "Video" tab
TV Aspect
Choose the setting to suit your television
and preference.
TV Type
Select to suit the type of television.
Time Delay
When connected with an AV amplifier and
Plasma display, adjust if you notice the
audio is out of sync with the video.
Still Mode
Specify the type of picture shown when paused.
Black Level Control
Change the black level of the picture if you
connected a television through the
COMPONENT VIDEO OUT terminals.
∫ "Audio" tab
PCM Digital Output
Check the digital input limitations of the
equipment you connect using COAXIAL or
OPTICAL terminal and select the maximum
sampling frequency of PCM digital output.
Dolby Digital
With COAXIAL, OPTICAL or HDMI AV
OUT connections ( page 6, 7)
DTS Digital Surround
With COAXIAL, OPTICAL or HDMI AV
OUT connections ( page 6, 7)
Dynamic Range Compression
Audio during Search
Speaker Settings
Choose the settings to suit your audio
system and the listening environment.
( page 17, Changing the speaker setting
to suit your speakers)
16
16
2 3
Select
ENTER
Go right
Select the tab.
≥ ≥
English
≥ ≥
§3
Automatic
≥ ≥
English
≥Changing the menu language from QUICK SETUP also changes this setting.
Setting ratings (When level 8 is selected)
≥ ≥
8 No Limit
When setting a ratings level, a password screen is shown.
Follow the on-screen instructions.
Do not forget your password.
A message screen will be shown if a DVD-Video exceeding the ratings level is inserted in the unit. Follow
the on-screen instructions.
≥
4:3 Pan&Scan: Regular aspect television (4:3)
The sides of the widescreen picture are cut off so it fills the screen (unless
prohibited by the disc).
≥
4:3 Letterbox: Regular aspect television (4:3)
Widescreen picture is shown in the letterbox style.
≥
16:9: Widescreen television (16:9)
≥
Standard (Direct View TV)
≥
Plasma TV
≥ ≥
0ms 20ms
≥
Automatic
≥
Frame: Overall quality is high, but the picture may appear blurred.
≥Lighter:When connected through VIDEO OUT or S VIDEO OUT.
≥Darker:When connected through COMPONENT VIDEO OUT.
Off:
Up to 48 kHz: When connected to equipment compatible with 44.1 or 48 kHz.
Up to 96 kHz: When connected to equipment compatible with 88.2 or 96 kHz.
Up to 192 kHz: When connected to equipment compatible with 176.4 or 192 kHz.
≥Signals from copy-protected discs are converted to 48 or 44.1 kHz.
≥Some equipment cannot handle sampling frequencies of 88.2 kHz, even if they can handle 96 kHz.
Read your equipment's operating instructions for details.
≥ ≥
Bitstream PCM
≥ ≥
Bitstream PCM
≥
Off
≥
On: Adjusts for clarity even when the volume is low through compressing the range of the lowest sound
level and the highest sound level. Convenient for late night viewing. (Only works with Dolby Digital)
≥ ≥
On Off
Speaker Type
≥
Multi-channel: when 3 or more speakers are connected.
≥
2-channel:
Multi-channel Setting (If you select "Multi-channel")
≥
Speaker presence and size
≥
≥Channel balance
Delay time
4
Select
ENTER
Register
Select the item. Make the settings.
The QUICK SETUP enables successive settings of the items in the
shaded area.
≥ ≥
French Spanish Original
≥ ≥
English French Spanish
≥ ≥
French Spanish Other
≥
1 to 7 0 Lock All: To prevent play of discs without ratings levels.
≥
CRT Projector
≥ ≥
40ms 60ms
≥
Field: The picture is not blurred, but picture quality is lower.
When not connected with COAXIAL or OPTICAL terminal.
Select "Bitstream" when the equipment can decode the bitstream (digital
form of multi-channel data). Otherwise, select "PCM".
≥If the bitstream is output to the equipment without a decoder, high levels
of noise can be output and may damage your speakers and hearing.
When audio is output from HDMI AV OUT terminal, and the connected
equipment does not support the item selected, the actual output will
depend on the peformance of this connected epuipment.
when 2 speakers are connected.
5
Select
1 2 3
4 5 6
ENTER
7 8 9
Register
0
≥ ¢¢¢¢
§1 §2
Other
≥ ¢¢¢¢
§2
Other
¢¢¢¢
§2
≥ ≥
LCD TV/Projector Projection TV
≥ ≥
80ms 100ms
SETUP
Press to exit.