Disconnecting The Cable - Panasonic CF-VDRRT3U Mode D'emploi

Connections to the Computer

Disconnecting the cable

Before disconnecting the interface cable, complete the data writing using the writing software
and the data reading as well as the music playback and other operations, and remove the
disc (media) from the drive.
CAUTION
•
When using a CD-RW disc with "B's CLiP," move the cursor to the "B's CLiP" icon on
the notifi cation area and right-click it, click [Eject], and then disconnect the interface
cable.
•
Be sure to follow the procedure below. Unless the correct procedure is observed, it
may not be possible to use the drive when the drive is connected next time.
1
Disable the USB connected drive.
Windows Vista
A Click
Windows XP
A Double-click
then click [Stop].
B Click [GENERIC CDRCB06 USB Device], then click [OK].
(When the interface cable has been removed after the computer is turned off, this step
is not necessary.)
2
Remove the interface cable.
18
All manuals and user guides at all-guides.com
on the notifi cation area and click the drive, then click [OK].
Windows 2000
on the notifi cation area and click [USB Mass Storage Device],