ABB Totalflow NGC8206 Manuel D'utilisation page 266

EEPROM
EFI
EFM
EFR
Electrical Interference
Electrically Erasable
Programmable Read-
Only Memory
Electrode
Electromagnetic
Compatibility
Electromagnetic
Interference
Electronic Flow
Measurement
EMC
EMI
Emitter
EN
Enagas
Encoder
Environmental
Conditions
EP Mix
Page B–22
See Electrically Erasable Programmable Read-Only Memory. The
PROM can be erased by electricity.
Electromechanical Frequency Interface.
See Electronic Flow Measurement.
Enhance Feature Release.
Electrical noise induced upon the signal wires that obscures the wanted
information signal.
ROM that can be erased with an electrical signal and reprogrammed.
Also referred to as the S Drive. It is a persistent drive that will not loose
it's memory unless manually reprogrammed. Also called E
Totalflow's XFC and XRC have a Serial EEPROM on board, which
generally holds registry, application configuration and warranty
information (non-volatile).
The site, area, or location at which electrochemical processes take
place.
Term used for European Union's New Approach Directive
2004/108/EC, which means the device or system is able to function in
its electromagnetic environment without introducing intolerable
electromagnetic disturbances to anything in that environment.
Any electromagnetic disturbance that interrupts, obstructs, or otherwise
degrades or limits the effective performance of electronics/electrical
equipment. It can be induced intentionally, as in some forms of
electronic warfare, or unintentionally, as a result of spurious emissions
and responses, intermodulation products, and the like.
Historically, flow measurement was tracked using a chart recording
technology. Developments in the field of electronics allowed for
electronic measurement devices to overtake the chart recording
market. This field continues to develop into peripheral markets, making
the "Flow Meter" a valuable asset with multi-tasking "Control"
capabilities. Totalflow's answer to this developing market is the XSeries
equipment.
See Electromagnetic Compatibility
See Electromagnetic Interference.
One terminal of a transistor.
Euro Norm (European Standard)
Spain's Certification Board
A device that converts linear or rotary displacement into digital or pulse
signals. The most popular type of encoder is the optical encoder, which
uses a rotating disk with alternating opaque areas, a light source, and a
photodetector.
All conditions in which a transducer may be exposed during shipping,
storage, handling, and operation.
A liquefiable hydrocarbon product consisting primarily of ethane and
propane.
2
Prom.
2103971-001 – rev. AB