Max SuperFramer SN890CH2 34 Manuel D'utilisation Et D'entretien page 16

DRIVING DEPTH ADJUSTMENT
Deeper Shallower
WARNING
ALWAYS disconnect air supply before making
adjustment.
The driving depth adjustment is made by adjust-
ing the Adjustment Dial.
1 With air pressure set, drive a few nails into a
representative material sample to determine
if adjustment is necessary.
2 If adjustment is required, disconnect air sup-
ply.
3 Refer to the mark on the Contact Arm area
for direction to turn the Adjustment Dial.
4 Re-connect air supply.
Adjustment Dial
TRIGGER LOCK MECHANISM
The tool is equipped with a Trigger Lock Mecha-
nism. Push and rotate the Trigger from LOCK to
the Trigger UNLOCK position before driving
nails.
Trigger Lock Dial
REMOVING JAMMED NAILS
WARNING
ALWAYS disconnect air supply before remov-
ing jammed nails.
16
Trigger