Table Des Matières; Owner Responsibility; Introduction; Product Description - Husqvarna K 1270 II Manuel D'utilisation

Masquer les pouces Voir aussi pour K 1270 II:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Introduction..................................................................... 2
Safety..............................................................................7
Assembly...................................................................... 13
Operation...................................................................... 18
Maintenance................................................................. 28

Owner responsibility

WARNING:
stone by methods such as cutting, grinding
or drilling, especially during dry operation,
generates dust that comes from the material
being processed, which frequently contains
silica. Silica is a basic component of sand,
quartz, brick clay, granite and numerous
other minerals and rocks. Exposure to
excessive amount of such dust can cause:
Respiratory disease (affecting your ability to
breathe), including chronic bronchitis,
silicosis and pulmonary fibrosis from
exposure to silica. These diseases may be
fatal;
Skin irritation and rash.
Cancer according to NTP* and IARC* */
National Toxicology Program, International
Agency for Research on Cancer.
Take precautionary steps:
Avoid inhalation of and skin contact with
dust, mist and fumes.
Wear and ensure that all bystanders wear
appropriate respiratory protection such as
dust masks designed to filter out
microscopic particles. (See OSHA 29 CFR
Part 1926.1153)
To minimize dust emissions, use water to
bind the dust, when feasible.
It is the owner's/employer's responsibility that the
operator has sufficient knowledge about how to use the
product safely. Supervisors and operators must have
read and understood the Operator's Manual. They must
be aware of:
2
Contents

Introduction

Processing of concrete and
Troubleshooting............................................................ 37
Transportation, storage and disposal........................... 39
Technical data.............................................................. 40
Warranty....................................................................... 41
The product's safety instructions.
The product's range of applications and limitations.
How the product is to be used and maintained.
California Proposition 65
WARNING!
The engine exhaust from this
product contains chemicals known
to the State of California to cause
cancer, birth defects or other
reproductive harm.

Product description

These HUSQVARNA, K 1270 II, K 1270 II Rail and K
1270 SmartGuard power cutters are portable handheld
cut-off machines powered by 2-stroke combustion
engines.

Intended use

The product is used to cut hard materials as concrete,
masonry, stone and steel. K 1270 II Rail is specially
made to cut railroad tracks. Do not use the product for
other tasks. The product must only be used by
professional operators with experience.
Work is constantly in progress to increase your safety
and efficiency during operation. Speak to your servicing
dealer for more information.
Note:
National/Local regulations could restrict the use
of this product.
1631 - 001 - 04.05.2021

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

K 1270 ii railK 1270 smartguard

Table des Matières