Husqvarna K 1270 II Manuel D'utilisation page 42

1. Carburetor and intake parts or fuel injection system.
2. Air filter and fuel filter covered up to maintenance
schedule.
3. Spark Plug, covered up to maintenance schedule.
4. Ignition Module.
5. Mufflers with catalyst and exhaust manifolds.
6. Fuel tank, fuel lines (for liquid fuel and fuel vapors),
fuel cap, carbon canister and tip-over/anti-slosh
valves as applicable.*
7. Electronic Controls, Vacuum, temperature, and time
sensitive valves and switches.
8. Hoses, connectors, and assemblies.
9. All other components the failure of which would
increase the engine's exhaust and evaporative
emissions of any regulated pollutant as set forth at
the following:
• For U.S. and Canada see US Federal Code of
Regulations, 40 C.F.R 1068 Appendix I (iii).
WHAT IS NOT COVERED
All failures caused by abuse, neglect, unapproved
modifications, misuse or improper maintenance are not
covered.
ADD -ON OR MODIFIED PARTS: Add-on or modified
parts that are not exempted by EPA may not be used.
The use of any non-exempted add-on or modified parts
will be grounds for disallowing a warranty claim. will not
be liable to warrant failures of warranted parts caused
by the use of a non-exempted add-on or modified part.
HOW TO FILE A CLAIM
If you have any questions regarding your warranty rights
and responsibilities, you should contact your nearest
authorized servicing dealer or call in USA at , in
CANADA at or send e-mail correspondence to
emissions@husqvarnagroup.com or warranty@hpp-
emissions.com.
WHERE TO GET WARRANTY SERVICE
Warranty services or repairs are provided through all
authorized servicing dealers. If the nearest authorized
servicing dealer is more than 100 miles from your
location, will arrange and pay for the shipping costs to
and from a brand authorized servicing dealer or
otherwise arrange for warranty service in accordance
with applicable regulations.
MAINTENANCE, REPLACEMENT AND REPAIR OF
EMISSION-RELATED PARTS
Any replacement part may be used in the performance
of any warranty maintenance or repairs and must be
provided without charge to the owner. Such use will not
reduce the warranty obligations of the manufacturer.
MAINTENANCE STATEMENT
The owner is responsible for the performance of all
required maintenance, as defined in the owner's
manual.
* Evaporative emission parts.
42 1631 - 001 - 04.05.2021