Replacing The Lamp; Storage Instructions; Guarantee Conditions - Qlima PEW 3015 Manuel D'utilisation

REPLACING THE LAMP

1.
2.
3.
4.
5.
6.

STORAGE INSTRUCTIONS

GUARANTEE CONDITIONS

4
36
Disconnect the power supply and ensure
that the lamp is cool.
Remove the two self-tapping screws from
the side cover of the casing. (See Fig A)
Take the side cover, front panels and grill
off. (See Fig B)
Disconnect the lamp leads on both sides.
(See Fig C)
Depress the clip at one end of the lamp
and lever that end out. Repeat at other
end of the lamp.
Slide the lamp outwards. (See Fig D)
Do not handle the halogen lamp with
bare hands. If it is inadvertently touched,
remove finger marks with a soft cloth and
methylated spirit or alcohol, otherwise the
marks will burn into the quartz, causing
premature heater failure.
Refit in reverse order.
Fig E
QLIMA PEW 3015
Power output/input 1500W
Voltage 220-240V, 50Hz
IP Rating IPx5
Weight 2.5 kg
Radiation range (•) ~3.2 m.
(•) for reference only
If children play with the heater, make sure that dangerous parts are removed.
Never dispose of non-biodegradable products in the environment, but dis-
pose of them in accordance with current national legislation.
The appliance is supplied with a 24-month guarantee, commencing on the
date of purchase. All material and manufacturing defects will be repaired or
replaced free of charge within this period. The following rules apply:
1. We expressly refuse all further damage claims, including claims for collater-
al and/or consequential damage.
2. Repairs to or replacement of components within the guarantee period will
not result in an extension of the guarantee.
3. The guarantee is invalidated if any modifications have been made, non-gen-
uine parts are fitted or repairs are carried out by third parties.
Fig A
Fig B
Fig C
Fig D
QLIMA PEW 3020
2000W
220-240V, 50Hz
IPx5
3 kg
~4 m.