Changing The Fuel Heater Filter (D Models) - Wacker Neuson HI400HD D Notice D'emploi

Maintenance
7.3

Changing the Fuel Heater Filter (D models)

■ Machine shut down
Prerequisites
■ Burner cool
CAUTION
Hot surface hazard. The external surface of the fuel filter canister may be hot.
► Allow the machine to cool before servicing.
WARNING
Hot fluids. The fuel inside the fuel filter canister may be hot.
► Wear hand and eye protection when doing this procedure.
Procedure Perform the procedure below to change the fuel heater filter.
1. Shut down the machine and allow it to cool.
2. Remove the screw that secures the cover to the housing (a).
3. Remove the filter (b).
4. Inspect the O-ring (c). Replace it if it is cracked, damaged, or deformed.
5. Install the new filter.
6. Re-install the cover.
Result The procedure to replace the fuel heater filter is now complete.
HI400HD D / HD G
a
72
b
c
wc_gr007774
ghi_tx001465gb_FM10.fm