Stopping - Wacker Neuson HI400HD D Notice D'emploi

HI400HD D / HD G
4.27

Stopping

Procedure Perform the procedure below to stop the machine.
WARNING
Electric shock hazard. Electric power is still active at the blower even when the
machine is turned OFF.
► Remove all electric power to the machine before servicing the machine.
1. Turn the operation mode switch to the OFF (O) position (c).
c
Shutdown The following sequence of events will occur after turning the machine off.
sequence
1. The burner will shut down.
2. The blower will stop when the machine is sufficiently cool.
ghi_tx001462gb_FM10.fm
53
Operation