Installation Preparation; General Information; Planning Information - Thermador PROFESSIONAL Série Manuel D'installation

Installation Preparation

General Information

Before using your appliance, be sure to read this manual.
Pay special attention to the Important Safety Instructions
located at the beginning of the manual.
This manual provides the proper installation instructions for
two styles of THERMADOR PROFESSIONAL
hoods:
• PHxxGS — 27" (686 mm) in depth, with widths of 36"
(914 mm), 42" (1067 mm), 48" (1219 mm), and 54"
(1372 mm). This model series features brushed
stainless-steel canopy with halogen lamps and heat
lamps.
• PHxxHS — 24" (610 mm) in depth, with widths of 30"
(762 mm), 36" (914 mm), and 48" (1219 mm). This
model series features brushed stainless-steel canopy
with halogen lamps.
30", 36", 42", 48", 54"
(762, 914, 1067, 1219, 1372 mm)
18"
(457 mm)
24" & 27"
(610 & 686 mm)
Figure 1: 24" & 27" Wall Hood Overall Dimensions

Planning Information

®
series wall
Use & Care Guide, Installation Manual, and Registration
Card
Parts Included
1 – Metal transition with backdraft
damper
2, 3, or 4 – Stainless steel baffle
filters (depending on model size)
2 – Filter spacers
2 or 3 – Grease trays (depending on
model size)
2 or 4 – Halogen lights (installed)
2 – 175W Heat lamps (on some
models)
1 – Remote blower adaptor
1 – Wooden bracket used as Hood
Mounting Bracket (part of install- DO
NOT THROW AWAY)
1 – Fastener assortment
English 3