Health Hazard By Dust; Technical Data; Symbols; Intended Use - Festool CT MINI HEPA Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Only qualifi ed repair personnel must perform
vacuum cleaner service. Service or maintenance
performed by unqualifi ed personnel could result in
a risk of injury. For example: internal wires may be
misplaced or pinched, safety guard return springs
may be improperly mounted.
When servicing a vacuum cleaner, use only iden-
tical replacement parts. Follow instructions in
the Maintenance section of this manual. Use of
unauthorized parts or failure to follow the Main-
tenance Instructions may create a risk of electric
shock or injury. Certain cleaning agents such as
gasoline, carbon tetrachloride, ammonia, etc. may
damage plastic parts.
Power consumption
Connected load to appliance plug socket max.
Total connected load max. (vacuum cleaner and plug socket)
Volume fl ow (air) max., turbine
Vacuum max., turbine
Filter surface
Suction hose, diameter x length
Dimensions L x W x H:
CT MINI HEPA
CT MIDI HEPA
Container capacity:
CT MINI HEPA
CT MIDI HEPA
Weight:
CT MINI HEPA
CT MIDI HEPA
Power cable length
Protection type

Symbols

Warning of general danger
Read the Operating Instructions/Notes!
Service
sanding, sawing, grinding, drilling and other con-
struction activities contains chemicals known (to
the State of California) to cause cancer, birth de-
fects or other reproductive harm. Some examples
of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemically-treated
lumber.
The risk from these exposures varies, depending on how
often you do this type of work.
microscopic particles. Wash hands after handling.

Technical data

430 x 330 x 420 mm (16.9 x 13.0 x 16.5 in.)
430 x 330 x 470 mm (16.9 x 13.0 x 18.5 in.)
This dust extractor is designed for the aspira-
tion and evacuation of non-toxic, non-hazardous
dusts, dirt, sand, shavings etc., and for vacuuming
water.
This dust extractor is designed in accordance with
IEC 60 335-1 and IEC 60 335-2-69 for a higher
loading in industrial use.
The fi ltering performance of the overall unit, which is
fi tted with a HEPA fi lter element, corresponds to HEPA
quality H 13 (medium degree of fi ltration 99.95 %).
5

Health hazard by dust

Various dust created by power
To reduce your exposure to these
chemicals: work in a well ventilated
area, and work with approved safety
equipment, such as dust masks that
are specially designed to filter out
222 m
5000 cm
27 mm x 3.5 m (1.06 in. x 11.48 ft.)

Intended use

400 - 1200 W
1200 W
2400 W
3
/h (7.84 cu.ft./h)
24000 Pa
2
(775 sq.in.)
10 l (2.6 gal.)
15 l (3.9 gal.)
8.7 kg (19.2 lbs)
9.0 kg (19.8 lbs)
7.5 m (24.6 ft.)
IP X4

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ct midi hepa

Table des Matières