Intended Use - Hailo G60 Mode D'emploi

Reference person for body
size and reaching height
Dimensions of the erected
scaffolding.
(maximum installation height)
highest possible
A =
reaching height
(height of the work platform)
highest possible
B =
standing height
C = height of the scaffolding
D = railing height
E = length of the scaffolding
F = length of the scaffolding
including crossbar
G = width of the scaffolding
H = width of the scaffolding
including crossbar
Dimensions of the folding
ladder frames when being
used as stepladder or single
ladder
highest possible
A =
reaching height
highest possible
B =
standing height
C = length of the ladder
D = height of the ladder
Highest possible
load capacity
Weight of the scaffolding

2. Intended use

The aluminium multipurpose scaffolding is
intended to enable users to reach high-level
working areas in buildings and in the open. This
scaffolding is a moveable work tool that can be
used in various locations.
The scaffolding may only be used if it has been
properly and fully erected as specified in these
instructions for use and is set up in a vertical
position. Any other use is considered as non-
intended use and may lead to property damage or
even to personal injury.
The scaffolding is not a toy.
The manufacturer or dealer shall not assume
any liability for damage that has been caused by
improper or incorrect use.
The user must always ensure that the scaffolding
is suitable for the respective use; if necessary a
risk assessment must be carried out in advance.
The legislation in the country of use must be
complied with.
The scaffolding complies with the requirements of
the standard NF E 85-200 and EN 131-4.
The scaffolding is intended exclusively for domestic
use. Any commercial use is strictly forbidden.
The highest possible load capacity of the work
platform is 150 kg.
Modifications to the scaffolding that are not
authorised by the manufacturer shall lead to
termination of the guarantee and warranty.
en
15