Table of Contents
Manufacturer:
Hailo-Werk
Rudolf Loh Gmbh & Co. KG
•
Daimlerstr. 8
35708 Haiger, Germany
Telefon: +49 (0) 2773 82-0
Telefax: +49 (0) 2773 82-1239
E-Mail: info @ hailo.de
www.hailo.de
1. Introduction
These directions for use and handling describe the safe
use of single ladders, extension ladders, and rope-pull
19
ladders.
19
20
23
24
25
The ladders comply with the requirements of the
27
European standard EN 131-1-2-3.
30
Please keep these directions for use and handling.
31
When the ladder is passed on to another user, these Use
and Operating Instructions should be provided.
31
31
31
31
2. Intended use
32
This ladder is a moveable work tool that can be used in
various locations. With this ladder, small scale jobs can
be carried out at heights at which use of other work
tools is not commensurate (see German Industrial Safety
Regulation).
This latter may only be used as specified in these Use
and Operating Instructions. Any other use shall be
deemed as not for the intended purpose. No liability shall
be assumed for damages that result from use that is not
for the intended purpose.
Modifications to the ladder that are not authorised by the
manufacturer shall lead to termination of the guarantee
and warranty.
These directions for use and handling
contain important safety information.
Therefore read over these directions
completely; in particular, pay attention
to all safety information before you
use the ladder.
GB
19