Cleaning And Maintenance; Recommended Charge Leads, Polarity; External Controls - GRAUPNER SJ Ultra MFD 150 Instructions D'utilisation

The charger is entirely maintenance-free in use, and requires no servicing of any kind. Ho-
P
wever, it is in your own interests to protect the unit from dust, dirt and damp!
To clean the charger, disconnect it from the car battery and any other battery, and wipe it
P
clean with a dry cloth (don't use cleaning agents!)
7. Recommended charge leads /polarity
The requirements made on rechargeable batteries vary greatly according to their particular application,
and this in turn calls for different types of battery connector. Please note that connectors, connector
names and polarities may vary from one manufacturer to another. For this reason we recommend that
you always use genuine matching connectors of identical construction. The following charge leads are
suitable for battery charging with this unit:
Japan
Order No. 3371
Only use genuine charge leads of adequate cable cross-section.
Charge monitor LED
PSU Output
Charge Output
20

6. Cleaning and maintenance

G2 (AMP/G2,5)
Order No. 3011

8. External controls

Change-over switch,
PSU / charger
EH balancer socket for
Graupner LiPo balancer
connector
BEC
Order No. 3037
Order No. 3021
Change-over
switch, LiFe / LiPo
JR JR transmitter
Order No. 3022
Mains switch /
fuse (back panel)
Mains lead,
220 - 240 V AC
50 Hz
LiPo/LiIo
select-LED
Current limiting
adjuster
Voltage limiting
adjuster
Operating Manual Ultra MFD 150