Extra Time; Automatic Programmes; Using The Accessories - Electrolux EOC6841 Notice D'utilisation

Masquer les pouces Voir aussi pour EOC6841:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4.
Press
display shows Heat + Hold . Press
OK to confirm.
When the function ends, an acoustic sig-
nal sounds.
The Heat + Hold function operates for 30
minutes.
The Heat + Hold function stays on if you
change the heating functions.

7.3 Extra Time

The Extra Time function makes the heat-
ing function continue after the Duration
ends.

8. AUTOMATIC PROGRAMMES

8.1 Assisted Cooking with
Recipe Automatic
This appliance has a set of recipes you
can use. Recipes are fixed and you can-
not change them.
Activating the function:
1.
Activate the appliance.
2.
Select the Assisted Cooking menu.
Press OK to confirm.
3.
Select the category and dish. Press
OK to confirm.
4.
Select Recipe Automatic . Press OK
to confirm.
When you use the Manual func-
tion, the appliance uses automatic
settings. You can change them as
with other functions.
8.2 Assisted Cooking with
Weight Automatic
This function automatically calculates the
roasting time. To use it, it is necessary to
input the food weight.

9. USING THE ACCESSORIES

WARNING!
Refer to the Safety chapters.
again and again until the
• Applicable for all heating functions with
Duration or Weight Automatic.
• Not applicable for heating functions
with CT Sensor .
Activating the function:
1.
When the cooking time ends, an
acoustic signal sounds. Press a sen-
sor field.
2.
The display shows the message for
Extra Time for five minutes.
3.
Press
to activate (or
4.
Set the length of the Extra Time .
Press OK to confirm.
Activating the function:
1.
Activate the appliance.
2.
Select Assisted Cooking . Press OK
to confirm.
3.
Select the category and dish. Press
OK to confirm.
4.
Select the Weight Automatic . Press
OK to confirm.
5.
Touch
or
weight. Press OK to confirm.
The automatic programme starts. You
can change the weight at any time. Press
or
to change the weight. When
the time ends, an acoustic signal sounds.
Press a sensor field to deactivate the sig-
nal.
With some programmes turn over
the food after 30 minutes. The
display shows a reminder.
9.1 Core temperature sensor
The core temperature sensor measures
the core temperature of the meat. When
ENGLISH
15
to cancel).
to set the food

Publicité

Chapitres

Table des Matières
loading

Table des Matières