Programmes; Information For Test Institutes; Settings - Electrolux ESF5201LOW Notice D'utilisation

8 www.electrolux.com

5. PROGRAMMES

Programme
3)
4)
5)
1) The pressure and the temperature of the water, the variations of the mains supply, the op-
tions and the quantity of dishes can change the values.
2) With this programme you have the most efficient use of water and energy consumption for
crockery and cutlery with normal soil. (This is the standard programme for test institutes).
3) This programme has a high temperature rising phase for better hygiene results. During the
rinsing phase, the temperature stays at 70 °C for at least 10 minutes.
4) With this programme you can wash a load with fresh soil. It gives good washing results in a
short time.
5) Use this programme to quickly rinse the dishes. this prevents the remaining food to bond on
the dishes and bad odours to come out from the appliance. Do not use detergent with this
programme.

5.1 Information for test institutes

For all the necessary information for test
performance, send an email to:
info.test@dishwasher-production.com

6. SETTINGS

6.1 Programme selection mode
and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
Degree of soil
Type of load
Normal soil
2)
Crockery and
cutlery
Heavy soil
Crockery, cut-
lery, pots and
pans
Normal soil
Crockery and
cutlery
Fresh soil
Crockery and
cutlery
All
Programme Consumption values
phases
1)
Duration
(min)
• Prewash 195
• Wash 50 °C
• Rinses
• Dry
• Prewash 140 - 160 1.3 - 1.5
• Wash 70 °C
• Rinses
• Dry
• Prewash 100 - 120 1.2 - 1.5
• Wash 65 °C
• Rinses
• Dry
• Wash 60 °C 30
or 65 °C
• Rinses
• Prewash 14
Write down the product number (PNC)
that is on the rating plate.
In user mode, the following settings
can be changed:
• The level of the water softener
according to the water hardness.
These settings will be saved until you
change them again.
Energy Water
(kWh) (l)
1.039 11
13 - 15
15 - 17
0.9 9
0.1 4