Cleaning The Milk System - Bosch TES 603 Série Mode D'emploi

Cleaning the milk system

Be sure to clean the milk system 4b
A
every time you make a drink involving
milk!
You can clean the milk system 4b automat-
ically using programme E or by
hand.
Automatic cleaning:
● Touch E and then R.
● Place an empty glass under the beverage
outlet 4 and stand the end of the suction
pipe 4d in it.
● Touch R to begin running the
programme.
The milk system 4b will now clean itself
automatically.
● Then empty the glass and clean the
suction pipe 4d.
Cleaning by hand:
B
Risk of burns!
The milk system 4b becomes
extremely hot. After use, always let
them cool down before you touch
them.
Take the milk system 4b apart to clean it:
● Push the beverage outlet 4 right down.
● Take off the cover 4a towards the front
and pull off the milk tube.
● Remove the milk system 4b by pulling it
straight forward.
● Take apart the upper and lower parts of
the milk system 4b.
● Separate the milk tube from the suction
pipe.
● Clean the individual parts with wash-
ing-up liquid and a soft cloth.
● Rinse all parts with clean water and dry
them.
The upper and lower parts of the milk
F
system 4b, the milk tube 4c and the
suction pipe 4d can also be cleaned
in a dishwasher.
● Reassemble the individual parts.
● Place the milk system 4b back in the
appliance from the front, making sure it is
straight.
● Replace the cover 4a.
en
17