Set The Initial Settings - Kenwood KDC-BT710DAB Mode D'emploi

GETTING STARTED
To adjust the clock
3
Turn the volume knob to select [CLOCK ADJUST], then press the knob.
4
Turn the volume knob to make the settings, then press the knob.
Hour Minute
5
Turn the volume knob to select [CLOCK FORMAT], then press the knob.
6
Turn the volume knob to select [12H] or [24H], then press the knob.
To set the date
7
Turn the volume knob to select [DATE FORMAT], then press the knob.
8
Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press
the knob.
9
Turn the volume knob to select [DATE SET], then press the knob.
10
Turn the volume knob to make the settings, then press the knob.
Day Month Year or Month Day Year
11
Press and hold to exit.
To return to the previous setting item, press
3

Set the initial settings

1
Press repeatedly to enter STANDBY.
2
Press the volume knob to enter [FUNCTION].
3
Turn the volume knob to select an item (see the following table),
then press the knob.
4 3
Repeat step until the desired item is selected or activated.
5
Press and hold to exit.
To return to the previous setting item, press
AUDIO CONTROL
SWITCH REAR/SUBWOOFER: Selects whether rear speakers or a subwoofer are
PREOUT * 1
connected to the line out terminals on the rear (through an external
amplifier). ( 31)
4
ENGLISH
DISPLAY
EASY MENU
TUNER SETTING
DAB L-BAND *
DAB ANT
POWER
.
PRESET TYPE
SYSTEM
KEY BEEP *
SOURCE SELECT
BUILT-IN AUX
.
P - OFF WAIT
Default: XX
* 1
Not applicable if 3-way crossover is selected.
* 2
This feature is not supported when using the supplied DAB antenna (without L-band
support). To use this feature, separately purchase a DAB antenna (with L-band support).
When entering [FUNCTION]...
ON: ZONE 1 illumination changes to white color. ;
OFF: ZONE 1 illumination remains as [COLOR SELECT] color. ( 23)
• ZONE 2 illumination changes to white color when you enter
[FUNCTION], irregardless of the [EASY MENU] setting.
• Refer to the illustration on page 22 for ZONE identification.
2
ON: Receives L-BAND ensemble during digital audio reception. ;
OFF: Cancels.
ON: Supplies power to the DAB antenna. Selects when using the supplied
antenna. ; OFF: Does not supply power. Selects when using passive
antenna without booster. ( 32)
NORMAL: Memorizes one station for each preset button in each band
(FM1/FM2/FM3/MW/LW/DB1/DB2/DB3). ; MIX: Memorizes one station
(digital radio or analog radio) for each preset button, regardless of the
selected band.
1
ON: Activates the keypress tone. ; OFF: Deactivates.
ON: Enables AUX in source selection. ; OFF: Disables. ( 9)
Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turn off (while in
standby mode) to save the battery.
20M: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes ; – – –: Cancels