Audio Settings - Kenwood KDC-BT710DAB Mode D'emploi

AUDIO SETTINGS

While listening to any source...
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following
table), then press the knob.
3 2
Repeat step until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
AUDIO CONTROL
SUB-W LEVEL LEVEL –50 to LEVEL +10 (LEVEL 0): Adjusts the subwoofer
output level.
MANUAL EQ The sound elements (frequency level, tone level, Q factor) are
preset into each selection (BAND1 LEVEL to BAND13 LEVEL).
BAND1 LEVEL
LEVEL LEVEL –9 to LEVEL +9 (LEVEL 0): Adjusts the level to memorize
for each source. (Before making an adjustment, select the source
you want to adjust.)
BASS EXTEND ON: Turns on the extended bass. ; OFF: Cancels.
BAND2 LEVEL to LEVEL –9 to LEVEL +9 (LEVEL 0): Adjusts the level to memorize
BAND13 LEVEL for each source. (Before making an adjustment, select the source
you want to adjust.)
Q FACTOR 1.35/1.50/2.00: Adjust the quality factor.
PRESET EQ NATURAL/ROCK/POPS/EASY/TOP40/JAZZ/POWERFUL/USER:
Selects a preset equalizer suitable to the music genre.
(Select [USER] to use the settings made in [MANUAL EQ].)
BASS BOOST LEVEL1/LEVEL2/LEVEL3/LEVEL4/LEVEL5: Selects your
preferred bass boost level. ; OFF: Cancels.
LOUDNESS LEVEL1/LEVEL2: Selects your preferred low and high frequencies
boost to produce a well-balanced sound at a low volume level. ;
OFF: Cancels.
SUBWOOFER SET
FADER
BALANCE
VOLUME OFFSET
.
Default: XX
SOUND EFFECT
SOUND RECNSTR
(Sound
reconstruction)
SPACE ENHANCE
SND REALIZER
STAGE EQ
DRIVE EQ
SPEAKER SIZE
X'OVER
DTA SETTINGS
CAR SETTINGS
• For 2-way crossover: [SUB-W LEVEL]/[SUBWOOFER SET] is selectable only if [SWITCH PREOUT]
is set to [SUBWOOFER]. ( 4)
• [SUB-W LEVEL] is selectable only if [SUBWOOFER SET] is set to [ON].
ON: Turns on the subwoofer output. ; OFF: Cancels.
(Not applicable if 3-way crossover is selected.)
R15 to F15 (0): Adjusts the rear and front speaker output balance.
L15 to R15 (0): Adjusts the left and right speaker output balance.
LEVEL –15 to LEVEL +6 (LEVEL 0): Preset the initial volume level of each
source. (Before adjustment, select the source you want to adjust.)
(Not applicable for TUNER source, DIGITAL AUDIO source and AUX source.)
ON: Creates realistic sound by compensating the high-frequency components
and restoring the rise-time of the waveform that are lost in audio data
compression. ; OFF: Cancels.
(Not applicable for TUNER source and DIGITAL AUDIO source.)
SMALL/MEDIUM/LARGE: Virtually enhances the sound space. ; OFF: Cancels.
LEVEL1/LEVEL2/LEVEL3: Virtually makes the sound more realistic. ;
OFF: Cancels.
LOW/MIDDLE/HIGH: Virtually adjust the sound position heard from the
speakers. ; OFF: Cancels.
ON: Boosts the frequency to reduce the noise heard from outside the car or
running noise of the tyres. ; OFF: Cancels.
Depending on the crossover type you have selected ( 5), 2-way crossover or
3-way crossover setting items will be shown. ( 20, 21)
By default, 2-way crossover type is selected.
For settings, 21, 22, Digital Time Alignment settings.
19
ENGLISH