Hitachi DH 24DVA Mode D'emploi page 10

English
13 mm Hammer Drill chuck and Chuck wrench
Impact Drill Application
(
Straight Shank Bit
3. Anchor setting (rotation + hammering)
Anchor setting adapter (for rotary hammer)
Anchor size
W1/4"
W5/16"
W3/8"
Anchor setting adapter (for manual hammer)
Anchor size
W1/4"
W5/16"
W3/8"
W1/2"
W5/8"
4. Bolt placing operation with Chemical Anchor. (rotation + hammering)
Standard socket
(
on the market
5. Demolishing operation (Hammering only)
Bull point (Round type) (SDS-plus shank)
Bull point (Square type) (SDS-plus shank)
9
13 mm Hammer
)
Drill Chuck
(SDS plus shank)
Chuck wrench
Anchor setting adapter
(for rotary hammer)
(SDS plus shank)
Anchor setting adapter
(for manual hammer)
(SDS-plus shank)
)
12.7 mm Chemical Anchor Adapter
19 mm Chemical Anchor Adapter