Hitachi DH 24DVA Mode D'emploi page 11

6. Groove digging and edging (Hammering only)
Cold chisel (SDS-plus shank)
Cutter (SDS-plus shank)
7. Grooving (Hammering only)
Grooving chisel (SDS-plus shank)
8. Drilling holes and driving screws (rotation only)
Drill chuck, chuck adapter (G) and chuck wrench
Drill chuck (13VLR)
Special
screw
Chuck wrench
9. Drilling holes (rotation only)
Drill chuck (13VLA)
Chuck wrench
13 mm drill chuck ass'y (include chuck wrench ass'y) and chuck (for drilling in steel or wood).
Chuck adapter (G)
(SDS plus shank)
Chuck adapter (D)
(SDS plus shank)
English
10