Technical Manual; Hazard Warnings; The Pxs24 System - Eaton PXS24 Série Manuel Technique

Technical Manual (EN)
PXS24... Standard
This manual describes the functioning of the Standard-series PXS24 and the "stand-alone" operation. The PXS24 system
allows for many possible combinations, which are described in detail in the "PXS24 system" manual.
Up-to-date information and the most recent version of this document are available at:
Eaton.com/PXS24
We recommend downloading the latest versions of all relevant documents prior to planning.
HAZARD The PXS24 series has been developed specifically for overload-protected and short-circuit proof 24 V
WARNINGS power supply units, of the type commonly used in automation applications.
Whenever the modules are switched on (i.e. when operating voltage is applied) they are live (provid-
ed that the slide switch at the front is set to "I")! If the unit has tripped (following an overload or
short circuit), switching it off and back on again will reset the trip.
Please refer to the technical data of the individual components, particularly the operating voltage and
the rated current.
THE PXS24 There are many different options for combining the various components of the PXS24 series. To avoid
SYSTEM restricting this flexibility, two separate series with different functionalities are available.
4
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria
© 2018 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation
1.) Economy: PXS24E-...
2.) Standard: PXS24S-...
Feature
Rated current
overload protection
Modular design
3 load outputs
Push-in terminals
Busbar (+/-)
Local status LED
Local control (on/off/reset)
Subsequent control
Digital output (OK/tripped)
Digital input (on/off/reset)
Economy Standard
0-10A 0-16A
x x
x x
x x
x x
x x
x x
x x
x
x
x
MA-PXS24_Standard.docx/10.2018e/150501507/IL019188ZU
All Rights Reserved / Printed in Austria