Wilo ElectronicControl Notice De Montage page 27

English
Display
ROTATION SENSE
0
MIN SPEED
30 HZ
DRY RUN PROT
NO
PRESSURE SETTING
2,0 BAR
START DELTA P
0,3 BAR
TIME BEFORE STOP
5 S
DISPLAY
STANDARD
RUNNING TIME
HOURS
23
Menu level 1
Hz
HISTORIC
26H
Menu level 2 Description
ROTATION Setting of the rotation
SENSE sense. See the pump
identification plate.
Push on
the pump (at 30hz)
and check the rotation
sense.
MIN SPEED Define the minimum
motor rotation speed
DRY RUN PROT If the installation is
provided with a level
switch (flow switch or
other ones) change NO
by YES.
PRESSURE Working pressure set-
SETTING ting in the installation
Start delta P Define the starting
pressure as : starting
pressure = setpoint
pressure - start delta
P.
TIME BEFORE Time setting before
STOP pump stop when there
is no flow.
DISPLAY Define the display
mode :
• STANDARD:network
• SERVICE : rotation
RUNNING TIME Total pump running
hours (H).
to start
pressure (bar) +
pressure setting
(bar)
frequency (Hz) +
pressure setting
(bar) + networkpres-
sure (bar) + flow
switch detection (1
or 0)
WILO SE 05/2011