Kinetec Performa Manuel D'utilisation page 19

Maintenance
After 2,000 hours of operation, the KINETEC Performa requires lubrication and maintenance operations
(lubrication of the joints, pointer stops and ball screws). The need for maintenance is indicated by display
of the message SERVICE when the system is switched on.
Despite that warning, you can continue to use your KINETEC Performa by pressing START but you should
contact your nearest KINETEC technician to have the maintenance operations conducted as soon as
possible.
When the machine is no longer in working condition, please return it to us, together with its accessories,
for destruction.
Troubleshooting
A spare parts list and technical catalog are available to you on request from your
KINETEC distributor.
If, after connecting the power supply cable to the power supply and switching on the
KINETEC Performa:
• The display does not indicate any information:
- Check that the electrical socket is live using another device.
- Replace the fuse(s) (35) of the connector with fuses of the same type
and calibre: 2 fuses T 500 mA 250V (6,3x32mm) (KINETEC order: 4610002400).
- If the display still does not indicate any information, contact your
nearest KINETEC technician.
• Your KINETEC Performa does not work and the display indicates 50 STOP 25 115,
Press START again.
Your KINETEC Performa still does not function: Contact your nearest KINETEC technician.
• Your KINETEC Performa does not function and the display indicates:
SERVICE D1 :
Or SERVICE D2 :
Or SERVICE D3 :
Contact your nearest KINETEC technician if the same message is displayed after having switched the
device off, then on, and started it by pressing START.
Cleaning
Avant tout, mettre l'appareil HORS TENSION en déconnectant le cordon secteur. Nous recommandons un
nettoyage entre chaque patient.
Le nettoyage est réalisé dans les conditions environnementales spécifiées dans le paragraphe
« Caractéristiques techniques » ci-après.
Utiliser un produit de DESINFECTION (solution sans alcool ou < à 5% d'alcool) par pulvérisation des SURFACES
(coques plastiques et éléments métalliques).
Afin d'assurer une hygiène optimale, il est conseillé de nettoyer les habillages après chaque patient, tous les
consommables de l'appareil peuvent être jetés sans danger.
Elimination and recycling
a • Packing: Packing must be separated from the components plastic and paper/cardboard and given to
the specific sites for recycling.
b • KINETEC PATIENT PAD KIT: Clean with disinfectant then to give it to the specific sites for recycling.
c • Unit: It contains electronic components, cables, aluminium, steel and plastic parts. When the splint is not
operational any more, to dismount and separate in groups from materials and to give them to correct
unit of recycling or return the machine to Kinetec for destruction.
Performa
angle measurement function failure,
failure during motion,
failure of motor direction,
EN
35
7/10