Kinetec Performa Manuel D'utilisation page 17

Using the Plastic Comfort Case kit
Specially designed to improve comfort and hygiene for the patient.
The Plastic Comfort Cases come with straps to precisely and quickly adjust to the patient's leg
CLEANING
To ensure optimal hygiene, clean the supports after each patient use
Use a DISINFECTANT product (alcohol-free or <5% alcohol solution) in spray (plastic cases and metal
components.
Replacement parts
23 4670024048 Complete foot support
24 4635010561 Foot support strap kit
25 4670023686 Tibia case with straps
26 4670023694 Femur case with straps
27 4670016657 Thigh bar
28 4645000841 Single strap
Part number to order
a complete kit: 4670017655
Use of the Kinetec Patient Pad Kit
The KINETEC Patient Pad Kit is designed for rapid fitting, optimal hygiene and maximum patient comfort.
- Position the straps on the leg and thigh cradles, make sure that the self-adhesive parts are visible.
- Place the sponge side next to the skin.
FOR OPTIMAL HYGIENE, A NEW SET OF PADS SHOULD BE USED FOR EACH PATIENT.
- CLEANING:
- Sterilization of the pads (if necessary): Sterilized at 134 °C during 18 minutes.
- Disinfecting of the pads: Washing at 30°C with use of a disinfecting solution during the rising cycle.
Example of products that can be used: Solution " Baclinge" at 0.125 % or "Souplanios" at 0,125% from
ANIOS Laboratory. A complete list of distributors in your country is available on request.
The KINETEC Performa is delivered with a complete set. Components:
- 4 straps (4650001107)
- 1 foot support (4650001131)
- 1 cover (4650001090)
Part number to order the complete set: 4650001058
Performa
Each cover is provided with a label to record the patient's name.
23
24
EN
dimensions.
25
28
26
5/10
27