Pc Diagnostic Tool; Start Diagnostic Tool - Dentsply Sirona CEREC AC Notice D'utilisation

Dentsply Sirona
Operating Instructions for the Acquisition Unit
66 37 461 D 3492
D 3492.201.06.27.02 09.2017
10

PC Diagnostic Tool

10.1

Start diagnostic tool

Test
Customer Diagnostics
Technician Diagnostics
Sirona Windows Diagnostics
Tip: If one of the following steps does not work, further steps can be found
in the Service Manual.
✔
The PC is switched off.
1. Switch on the PC.
2. Repeatedly press the "F11" or "F8" button (in V2.2.1 - V2.2.3) until the
PC switches to the boot menu.
3. Insert the diagnostics tool CD into the drive.
4. Select the "P3: TSSTcorp CDDVDW ..." menu option.
5. Confirm your selection with the "Return" key on the keyboard.
 The diagnostics tool starts and a selection menu appears.
Tip: After one minute, if none of the arrow keys have been
pressed, the "Customer Diagnostics" test starts
automatically.
6. Select the test using the arrow keys.
7. Confirm your selection with the "Return" key on the keyboard.
 The test starts.
10 PC Diagnostic Tool
Suitable for
Suitable for the user, in order to check
the PC components.
Suitable for the technician, in order to
check the PC components.
Windows Stress Test, in order to test
the PC at permanent load.
71