Sirona Windows Diagnostics - Dentsply Sirona CEREC AC Notice D'utilisation

10 PC Diagnostic Tool
10.2 Test procedure
76
10.2.3

Sirona Windows Diagnostics

General
The "Sirona Windows Diagnostics" test loads the PC-specific
components simultaneously over a long period of time. This period of time
is determined by the user.
As a result of this load
● the temperature in the PC is significantly increased compared with
normal operation.
A temperature malfunction or any existing faults are thereby
detected.
● Thanks to the temporal, unlimited test phase, sporadically occurring
faults are more likely to be detected.
Tip: Only conduct the test if at least one of the "Customer
Diagnostics" or "Technician Diagnostics" tests has been
completed with a "pass" and without errors.
Performing the test
Tip: Allow the "Sirona Windows Diagnostics" test to run for at least
1 hour. For optimum results, allow the test to run overnight.
✔
You have started the "Sirona Windows Diagnostics" test and
Windows starts in the test environment. The "Sirona Windows
Diagnostics" test starts automatically.
Dentsply Sirona
Operating Instructions for the Acquisition Unit
66 37 461 D 3492
D 3492.201.06.27.02 09.2017